Wuxi Consensic Electronic Technology Co., Ltd.
Wuxi Consensic Electronic Technology Co., Ltd.
Add to Cart
1. Ensure that the sensor is not damaged and the wiring is complete;
2. When installing and connecting, the airflow direction is consistent with the sensor airflow indication direction, and the sensor lead line should be correctly connected according to the definition;
3. After confirming the correct connection, then connect the power supply to start work;
4. The sensor is connected to the power supply as far as possible after preheating for 2 minutes before use, better accuracy.
|
Test conditions: Vin = 12±0.1VDC, Ta=25°C. Relative humidity: 40% <relative humidity <60%. Maximum operating temperature range-15°C to + 70°C |
|||||
| specifications |
High Accuracy 1.5%F. S Accuracy Analog Output 1 To 5V Medical Flow Sensors |
||||
| least value | normal value | crest value | unit | remarks | |
| Flow range | 0 |
— |
10000 | sccm | Customizable specifications |
| service voltage | 8-24V | V | customizable | ||
| current | 50 | mA | |||
| Maximum voltage output | 4.96 | 5 | 5.02 | V | linear |
| Zero point voltage output | 0.98 | 1 | 1.02 | V | linear |
| accuracy | 1.5 | 2 | %FS | ||
| repetitiveness | ±0.3 | % | |||
| resolution ratio | 0.1 | % | gamut | ||
| withstand voltage | 0.3 | 0.5 | MPa | customizable | |
| response time | 9 | 65 | 500 | ms | customizable |
| zero drift | 0.2 | %Year | gamut | ||
| Calibration conditions | 0℃, 1 standard atmosphere | ||||
| The overall material | Silicon carbide, epoxy resin, PPS, and silicon shall serve as the sealing material | ||||