PARAMETER	SYMBOL	CONDITIONS	MIN	TYP	MAX	UNITS
Over Pressure					1000 (10)	kPa (bar)
Supply Voltage (with respect to GND)	V_DD		-0.3		6.0	V
Voltages at Analog I/O – In Pin	V_INA		-0.3		V_DD +0.3	V
Voltages at Analog I/O – Out Pin	V_OUTA		-0.3		V_DD +0.3	V
Storage Temperature	T_STOR		-50		130	°C

PARAMETER	SYMBOL	CONDITIONS	MIN	TYP	MAX	UNITS
OPERATION
Supply Voltage to GND¹	V_S		4.75	5.0	5.25	V
Operating Temperature Range			-40		85	°C

PRESSURE RANGE 1 CHARACTERISTICS (CPS171-JW001)
Range 1			10 (100)	—	115 (1150)	kPa (mbar)
Full Scale Output	V_FSO	@V_S=5.0V	—	4.7	—	V
Full Scale Span	V_FSS	@V_S=5.0V	—	4.5	—	V
Accuracy		(0 to 85°C)	—	—	±1.5	%V_FSS
Sensitivity	V/P		—	45	—	mV/kPa

PARAMETER	SYMBOL	CONDITIONS	MIN	TYP	MAX	UNITS
SUPPLY CURRENT
Update Mode Current	I_DD	Worst Case Settings: 12-bit, 0ms Power Down		1200	1500	µA
ANALOG OUTPUT
CPS171	Analog_P	10 to 115kPa (100 to 1150mbar)	0.4		4.65	V
Analog OUTPUT
Resolution	RES			12		Bits
Analog Additional Error (Including Ratiometricity Error)	Eout	-40 to 125°C		0.1	0.5	%
SYSTEM
Trimmed System Frequency	f_SYS	All Timing in this Specification are Subject to this Variation		1.85		MHz
Start-Up-Time Power-On to Data Ready	t_STA	Fastest and Slowest Settings	4.25		173	ms
Update Rate (Normal Mode)	T_{RESP_UP}	Fastest and Slowest Settings	0.70		288	ms
Peak-to-Peak Noise @ Output (100 Measurements in 12-bit)	N_OUT			5		LSB

1.Factory Calibrated Pressure Sensor

2.Supply Voltage: 5.0V ±10%

3.Operating Temperature Range: -40°C to +85°C

Inquiry Cart 0