Performance Parameters
Functional Items: CMF 5032
| Performance Parameter |
Specification |
Unit |
Remarks |
| Power Supply Voltage |
8~24 VDC, 50 mA |
VDC |
Selectable |
| Accuracy |
±1.5 |
% |
FS |
| Response Time |
65 |
ms |
Selectable |
| Maximum Pressure |
0.8 |
MPa |
Customizable |
| Communication Mode |
RS 485 (MODBUS) |
|
|
| Output Method |
Analog outputs of 1-5 |
VDC |
|
| |
4-20 mA |
|
Optional |
| Temperature |
Medium: -10~65, Ambient: -25~85 |
℃ |
|
| Joggle |
PT1/4 |
|
Customizable |
| Calibration Method |
Air at 20℃, 101.325 kPa |
|
|
| Overall Material |
Stainless Steel |
|
|
Use Instructions
- Pre-Use Reading:Please read the instructions carefully before using the product.
- Environment Suitability:Best used in a clean gas environment.Not suitable for environments with large amounts of dust, oil pollution, and multiphase flow.For use in environments with large quantities of water vapor, please contact the manufacturer in advance.
- Industry Application:Suitable for gas measurement, monitoring, and control in automotive, industrial, commercial, and equipment industries.Not suitable for environments other than those specified.
- Operational Compliance:Follow relevant operating specifications and safety precautions strictly during use or application.
- Liability Disclaimer:Wuxi Consensic Electronic Technology Co., Ltd. and its subsidiaries will not be liable for damage resulting from improper use of the product.Other matters shall be subject to the sales contract.
Matters Needing Attention
- Operational Environment:Ensure the product operates in the environment defined in the manual.
- Installation and Connection:Pay attention to the gas flow mark during installation.Perform connection and leakage detection according to the corresponding regulations.
- Product Use:Avoid online installation of pipes, cleaning of pipes, or other operations that may introduce a large amount of impurities as they may damage the product.
- Medium Conditions:Presence of water in the medium or immersion in water may cause sensor sensitivity decline or damage.
- Power Supply Caution:Incorrect connection of the positive and negative electrodes of the power supply can burn out the sensor's internal circuit, affecting its use.
